Showing 1–16 of 21 results

All in one Lift Gear Box

Designed for lifting in the context of standard systems with a capacity of 480daN using a 520 mm pulley. Equipped with design features which facilitate installation in three different positions to fix it to the frame. This layout enables the operator to use the same unit for installation in the right, left and vertical positions.

Double-acting Hydraulic Cylinder

DOUBLE ACTING HYDRAULIC CYLINDER GHP320

High Performance Double-acting Hydraulic Cylinder GHP320

Nominal working pressure: 250 bar (25 MPa)
Maximum working pressure: 320 bar (32 MPa)
Liner: E355 SR EN 10305 -1 steel liner, polished inside Ra<0.4 tolerance H8
End plug: S355JR – ASTM A105 steel
Rod: Alloy steel 42CrMo4 +QT chromed Ra<0.2 tolerance f7 corrosion resistance 200h NSS ISO 9227 (Neutral salt spray fog test) rating > 9 ISO 10289. Rods with corrosion resistance on request 500h, 1000h
Pilot boss: Steel C45.
Piston: Steel C45

Double Acting Hydraulic Cylinder with Location Sensor MHP320

Double Acting Hydraulic Cylinder with Location Sensor MHP320

Nominal working pressure: 250 bar (25 MPa)
Maximum working pressure: 320 bar (32 MPa)
Liner: E355 SR EN 10305 -1 steel liner, polished inside Ra<0.4 tolerance H8
End plug: S355JR – ASTM A105 steel
Rod: Steel alloy 42CrMo4 +QT chromed Ra<0.2 tolerance f7 corrosion resistance 200h NSS ISO 9227 (Neutral salt spray fog test) rating > 9 ISO 10289. Corrosion resistant rods on request 500h, 1000h
Pilot boss: Steel C45.
Piston: Steel C45

HELICAL GEARS

Gambini Meccanica manufactures precision gears up to module 30, with just milled or ground profiles, with helical tooth system, right or left-hand with any possible inclination. The maximum external diameter we can realize is up to 1000 mm. We use different raw materials: C45, 18NiCrMo5, 20MnCr5, all the alloy or not alloy materials, different types of nylon, cast irons, alloys of common bronze and bronze-aluminium, alloys of aluminium, stainless steel and different typologies of Bakelite.

HELICAL TOOTH RACKS

Gambini Meccanica manufactures top quality racks both with straight and
helical tooth system by employing several typologies of raw materials. We
produce racks from module 0.5 until module 42, from quality 5 to quality
10.

Hydraulic Cylinders – Self Assembly Cylinder SHP320

Hydraulic Cylinders – Self Assembly Cylinder SHP320

Nominal working pressure: 250 bar (25 MPa)
Maximum working pressure: 320 bar (32 MPa)
Liner: E355 SR EN 10305 -1 steel liner, polished inside Ra<0.4 tolerance H8
End plug: S355JR – ASTM A105 steel
Rod: Alloy steel 42CrMo4 +QT chromed Ra<0.2 tolerance f7 corrosion resistance 200h NSS ISO 9227 (Neutral salt spray fog test) rating > 9 ISO 10289. Rods with corrosion resistance on request 500h, 1000h
Pilot boss: Steel C45.
Piston: Steel C45

Medical laminates

Our medical laminates (roll-goods) are mainly applied for the production of surgical drapes, healthcare applications drapes, surgical-gowns reinforcement and protective clothing.

They are composed of one or more Nonwoven layers laminated onto a soft, antimicrobial microembossed multi-layer (Cast Coex) Polyolefinic film or Breathable membrane.

Rotors die cast for induction motors

Nuova Volonterio produces rotors in aluminium and silumin ( aluminium alloy ). Range of Rotor diameter is from 17,4mm up to 135mm but we are specialized in Rotor die cast with small diameter and high length, mainly for tubular motors and vibrating motors

ROUND RACKS

Gambini Meccanica realizes round racks, with ground or cold drawn raw
materials, with straight or helical tooth system, right- or left-hand.
Quality classes and modules which can be realized are the standard ones and the length is up to 3000 mm. The most common raw materials employed are the following ones: C45 and stainless steel.