Beach cleaning machine model Balena

The beach cleaner works mechanically taking the motion directly from the PTO of the tractor, to which is connected with the three point linkage, which also adjusts the working depth from 0 to 15 cm for a width of cm. 160.

Placeholder

Platinum Membership

400,00

With this package

  • add up to 36 products
  • graphic support
  • professional SEO Adv
  • 10 marketplaces promotion
  • 10 featured products in home
  • pay 10% of commission on sales
  • 1 year account validity

PTFE Bearings

This code identifies a line of bearings that are specially manufactured to allow the bonding of a filled PTFE coated fabric (lead free, in accordance to the European Parliament “ELV” directive 2000/53/EC) on four types of backing metal layers, like carbon steel, bronze, stainless steel and Inconel 625.
The Sliding Surface is primarily composed of filled PTFE coated fabric, and other elements to guarantee the high wear resistance. The TX products find their best usage in slow-moving applications, with heavy loads, and where dry operation is required. Thanks to the thick self-lubricating layer up to 0,4 mm, this product has a high wear resistance, and can work in dirty or abrasive environment.
For this product it is not recommended the use of oil, while the use of special grease, such as silicon or lithium soap, is only possible during the assembly.

Sliding Bearings

The TF type is a composite multilayer material used in the manufacture of dry self-lubricating Sliding Bearings.
The main parts composing this product are a filled modified PTFE layer (lead free, in accordance to the European Parliament “ELV” directive 2000/53/EC) for the sliding self-lubricating surface, and a special primer used to allow the sintering of the PTFE layer to four types of baking metal layers, like carbon steel, bronze, stainless steel and Inconel 625.
Thanks to its structure, the TF type provides an excellent match between the mechanical strength of the steel, and the low coefficient of friction due to the modified PTFE sliding layer.
This is a product, that can be used in applications with medium loads, and in a clean environment with low levels of abrasive elements such as metal powders. It can also be used with special mineral oils and specific greases such as silicone compounds or lithium soap.

Telusiano – Falerio dei Colli Ascolani D.O.C.

Il nome di questo vino ha origini lontane ed è preso dall’antico nome della zona a ridosso delle attuali tenute Rio Maggio. All’epoca dei primi insediamenti (età di Nerva 96-98 d.C.) la zona si chiamava appunto Telusiano, oggi conosciuta col nome di Monte San Giusto. La chiesa del paese, di origine romanica, porta il nome di Santa Maria della Pietà in Telusiano, e in essa si può ammirare la grandiosa pala della Crocifissione, capolavoro di Lorenzo Lotto, che per questa solenne opera fu pagato  in fiorini e in olio di olive ascolane.

Stator packets riveted diameter 42×21,55

Stator packets riveted diameter 42×21,55 length 35mm and 120mm, 12 slots and aluminium Rotor die cast diameter 20,92 length 35mm and 120mm, 17 slots ( with ring in sinter material for magnetic brake too )

Stator and Rotor for AC motors

Stator packet riveted diameter 64×38 length 90mm, 24 slots and aluminium Rotor die cast diameter 38 length 90mm, 18 slots – our catalogue Stator and Rotor lamination Model 100AR – Stator and Rotor for AC motors for rolling shutter – Raw material: Non grain oriented electrical steel, finally annealed
(according to DIN EN 10106 )

Aluminium Rotor die cast

Stator packets riveted diameter 33×18 length 80mm and 100mm, 12 slots and aluminium Rotor die cast diameter 18 length 80mm and 100mm, 16 and 19 slots ( with ring in sinter material for magnetic brake too ) – our catalogue Stator and Rotor lamination Model 97R and Model 97E – Stator and Rotor for AC motors for rolling shutter and vibrating motor – Raw material: Non grain oriented electrical steel, finally annealed ( according to DIN EN 10106 )

Stator packet riveted

Stator packet riveted diameter 80x72x45 length 80mm, 24 slots and aluminium Rotor die cast diameter 45 length 80mm, 22 slots – our catalogue Stator and Rotor lamination Model 101DS – Stator and Rotor for AC motors for rolling shutter and sliding gate

Rotors die cast for induction motors

Nuova Volonterio produces rotors in aluminium and silumin ( aluminium alloy ). Range of Rotor diameter is from 17,4mm up to 135mm but we are specialized in Rotor die cast with small diameter and high length, mainly for tubular motors and vibrating motors